Previous Models

M80 Series

Complete remote: MRC80
Replacement plastic case: Part# 242080
Suitable for: All pre-2009 M80 models & MX750

A new remote has to be memorised into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below. 433MHz

To learn new remotes to M80 models:

  1. Disarm by existing remote, or use the override
  2. Open the drivers door and leave open
  3. Turn the ignition ON/OFF 3 times - siren chirps
  4. Press arm button on first remote (siren chirps)
  5. Press arm button on second remote (siren chirps)
  6. Repeat for any other remotes
  7. Wait 10 seconds for learning process to complete


To learn MRC80 to MX750

  1. Disarm by existing remote, or use the override
  2. Ignition ON and press override button 4 times and hold down on 4th press (siren chirps after 3rd press)
  3. Press arm button on first remote (siren chirps)
  4. Press arm button on second remote (siren chirps)
  5. Repeat for any other remotes
  6. Release the override button and turn ignition OFF
  7. NOTE: existing remotes must be re-learnt at the same time