Current Models

M80 Series

Part# MRC83G - Green LED - 303Mhz

2009 to mid 2011
Part# MRC83R - Red LED - 433Mhz
Current - from mid 2011

Battery type: CR2032 x 1

Not interchangable with each other. The above frequencies are allocated by NZ Radio Service for 'short duration transmission' vehicle security use. Compliance N4096 Z333

Replacement plastic case: Part# 242183

A new remote has to be memorised into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below. 

To learn new remotes to M80 models:

  1. Disarm by existing remote, or use the override
  2. Open the drivers door and leave open
  3. Turn the ignition ON/OFF 3 times - siren chirps
  4. Press arm button on first remote (siren chirps)
  5. Press arm button on second remote (siren chirps)
  6. Repeat for any other remotes
  7. Wait 10 seconds for learning process to complete